Additives & Master Batches
Plastic compounded materials to improve the durability and toughness of a variety of plastic resins.
Calcium Filler Master Batches
PP Filler
| Properties | Test Method | Unit | Specification |
|---|---|---|---|
| Base Polymer | - | - | PE/PP |
| Melt Flow Index | ASTM D1238 | gm/10min | 1 to 5 |
| Bulk Density | PLPL-TM | gm/cm 3 | 1.20 ± 0.05 |
| Filler Content | PLPL-TM | % | 20-80 |
| Moisture | PLPL-TM | % | 0.10(MAX) |
| Chips/Gram | PLPL-TM | Nos. | 45 ± 5 |
| Recommended Dosage | 10-50% Depend on Application | ||
PP Lam Filler
| Properties | Test Method | Unit | Specification |
|---|---|---|---|
| Base Polymer | - | - | PE/PP |
| Melt Flow Index | ASTM D1238 | gm/10min | 1 to 5 |
| Bulk Density | PLPL-TM | gm/cm 3 | 1.20 ± 0.05 |
| Filler Content | PLPL-TM | % | 70-80 |
| Moisture | PLPL-TM | % | 0.10(MAX) |
| Chips/Gram | PLPL-TM | Nos. | 45 ± 5 |
| Recommended Dosage | 10-50% Depend on Application | ||
LLD Filler
| Properties | Test Method | Unit | Specification |
|---|---|---|---|
| Base Polymer | - | - | PE/PP |
| Melt Flow Index | ASTM D1238 | gm/10min | 1 to 5 |
| Bulk Density | PLPL-TM | gm/cm 3 | 1.20 ± 0.05 |
| Filler Content | PLPL-TM | % | 20-80 |
| Moisture | PLPL-TM | % | 0.10(MAX) |
| Chips/Gram | PLPL-TM | Nos. | 45 ± 5 |
| Recommended Dosage | 10-50% Depend on Application | ||
HD Lam Filler
| Properties | Test Method | Unit | Specification |
|---|---|---|---|
| Base Polymer | - | - | PE |
| Melt Flow Index | ASTM D1238 | gm/10min | 1 to 5 |
| Bulk Density | PLPL-TM | gm/cm 3 | 1.20 ± 0.05 |
| Filler Content | PLPL-TM | % | 20-80 |
| Moisture | PLPL-TM | % | 0.10(MAX) |
| Chips/Gram | PLPL-TM | Nos. | 45 ± 5 |
| Recommended Dosage | 10-50% Depend on Application | ||
Master Batches for Polyolefins
PP Based
| Properties | Test Method | Unit | Specification |
|---|---|---|---|
| Base Polymer | - | - | PE |
| Melt Flow Index | ASTM D1238 | gm/10min | 1 to 5 |
| Bulk Density | PLPL-TM | gm/cm 3 | 1.20 ± 0.05 |
| Filler Content | PLPL-TM | % | 70-80 |
| Moisture | PLPL-TM | % | 0.10(MAX) |
| Chips/Gram | PLPL-TM | Nos. | 35 ± 5 |
| Recommended Dosage | 10-50% Depend on Application | ||
HDPE Based
| Properties | Test Method | Unit | Result |
|---|---|---|---|
| Carrier Rasin | - | - | Recycled LLDPE/LDPE/PP |
| Carbon/Color Content | SRP-TM | % | 40-50 |
| Melt Flow Index @190 oC/5kgs | ASTM D1238 | gm/10min | 2-4 |
| Bulk Density | SRP-TM | gm/cm 3 | 0.75 ±0.05 |
| Filler Content | SRP-TM | % | Nil |
| Moisture Content | SRP-TM | % | 0.1(MAX) |
| Chips/Gram | SRP-TM | Nos. | 50 ± 5 |
| Dispersability | - | - | Excellent |
RPET Black Master Batch
RPET Black Master Batch
| Properties | Test Method | Unit | Result |
|---|---|---|---|
| Base Polymer | - | - | RPET |
| I.V. Of Base Polymer | SRP-TM | dl/gm | 0.70 ± 0.05 |
| I.V. Of MB | SRP-TM | dl/gm | 0.40 ± 0.05 |
| Bulk Density | SRP-TM | gm/cm 3 | 0.95 ± 0.05 |
| Carbon Content | SRP-TM | % | 30 ± 2 |
| Moisture | SRP-TM | % | ≤ 0.25 |
| Chips / Gram | SRP-TM | Nos. | 30 ± 5 |
